進口角式隔膜閥采用橡膠隔膜時，即使流體內有些異物夾雜也能完全切斷，適合含有弱酸、弱堿、無機鹽、粘性流體、石灰漿等的控制When the imported angle diaphragm valve adopts a rubber diaphragm, it can completely cut off even if there are some foreign objects in the fluid, suitable for control containing weak acids, weak alkalis, inorganic salts, viscous fluids, lime slurry, etc

品牌：RETZ瑞茨/我們一直致力于流體控制領域的持續創新，始于2005……

規格尺寸：1～6”

適用壓力：PN10、PN16 、150LB、JIS10K

適用溫度：-20~100℃

控制Control:手動manual

主要性能 Main performance

1.進口角式隔膜閥的入口和出口成90°角，閥瓣下有隔膜作為隔離閥體和閥蓋的屏障，切斷性能和流通能力均佳，密封可靠，流通能力好，流阻小，無淤積介質的死角 The inlet and outlet of the inlet angle diaphragm valve form a 90 ° angle, and there is a diaphragm under the valve disc as a barrier to isolate the valve body and valve cover. It has excellent cutting performance and flow capacity, reliable sealing, good flow capacity, small flow resistance, and no dead corners of accumulated media

2.閥體與蓋被中間隔膜隔開，使得隔膜上方的閥蓋，閥桿等零件不受介質侵蝕 retz The valve body and cover are separated by the intermediate diaphragm, so that the bonnet, valve stem and other parts above the diaphragm are not corroded by the medium

3.驅動部通過隔膜隔離，因此無球閥、蝶閥之類的填料壓蓋部，無外部泄漏或外界空氣進入污染流體  The driving part is isolated by diaphragm, so there is no packing gland part such as ball valve and butterfly valve, and there is no external leakage or external air entering the polluted fluid

技術性能規范 Technical performance specifications

RETZ的隔膜閥可以滿足工控系統的截?cái)�、調節、防腐、粘性流體、纖維質流體、泥漿、污泥、懸浮固態物、衛生潔凈等流體的控制RETZ’s diaphragm valve can meet the requirements of industrial control systems for cutting off, regulating, anti-corrosion, viscous fluid, fibrous fluid, mud, sludge, suspended solids, hygiene, and other fluid control